Unfortunately, quite often the condition of the water pipes supplying your apartment or house with water leaves much to be desired. Typically, tap water is contaminated with lead, rust, and sometimes oil products. And the chlorine used to purify tap water is far from good for health. The Aquaphor trio water purifier qualitatively cleans water from organic impurities, heavy metals and chlorine. It is quite possible to install the Aquaphor trio water purifier with your own hands.
Instructions
Step 1
Choose a convenient place to install the Aquaphor trio water purifier and a fresh water tap. Typically, the water purifier is placed directly under the sink. Make sure the cleaning tubes will pass without kinks.
Step 2
Install a tap for clean water Make a hole of the required diameter in the sink. Unscrew the union nut from the threaded tap shank. Install the rubber gasket and decorative stand onto the threaded tap shank. Insert a fresh water tap into the sink hole. Attach the plastic and metal lock washers and retaining nut to the threaded shank of the faucet located at the bottom of the sink. Insert a tube into the threaded end of the valve and tighten the union nut tightly. The tube must be inserted with the end on which the pressed-in tapered bushing is located. Make sure the tube is securely fixed.
Step 3
Install a control tap Shut off the cold water supply. Connect the tee to the inlet valve of the pipeline using the tapping method. Install the gasket and adapter on the inlet valve. Remove the clip from under the plastic sleeve of the adapter. Moisten the tube with water and insert it into the adapter until it stops. Secure the clip under the plastic sleeve of the adapter. Make sure the tubing is securely attached.
Step 4
Connect the Aquaphor trio water purifier Install the water purifier body using the brackets included in the delivery set. It should be noted that to replace the filters, it is necessary to leave the bottom distance of at least 10 cm. Remove the clip located under the plastic sleeve from the outlet and inlet connections of the water purifier. Press down on the end of the plastic sleeve and pull out the plug. Moisten the tubes with water and insert until they stop. Connect the tubing from the inlet tap to the inlet of the water purifier. Connect the pipe of the fresh water tap to the outlet of the water purifier. Install the clips under the plastic bushings of the outlet and inlet of the Aquaphor trio water purifier.
Step 5
Secure the loose sections of the tubing so that they are not pinched by other objects.
